Mini Co2 Laser Engraving Machine With Motorized Up/Down Table. Control system : 32 BIT DSP. Working size (XY): 20'' x 12'' (500mm x 300mm). Motorized Up/Down work plate (Z): 160mm. Laser tube type : Co2 Glass sealed laser tube.
Driver type : Micro Stepping Motor. PC Interface : USB2.0 and USB Disk. Image form : HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI. Package : Standard Wooden case for export. Laser Engraving software Package (English Version).Air exhaust fan(Installed on machine). Communication cable and USB cable. 3 Reflect optics (installed in the machine). 1 Focus optics (installed in the machine). Red-dot Positioning Function(showing outline or laser dot position).
Rotary axis (Engraving cylinder materials). Industry water Cooling system CW-3000. Provide free service for the machine all the life. Q: Do I need two laser machines to engrave and cut separately?A: No, the laser machines are capable of both engraving and cutting. One machine alone can fulfill the two purposes. Q: Do the laser machines need to be connected to a laptop or desktop computer to work? A: Yes, either is ok. It supports Windows 10, Windows 2000, Windows XP, Win 7, and other operating systems. Q: What kind of graphic format does it support? A: JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW. Q: How to distinguish laser tubes with different powers and applications? Laser tube length (relatively speaking, the longer, the bigger). Laser tube diameter (relatively speaking, the thicker, the bigger).
The bigger a laser tube power is, the deeper the machine can cut, but its light spot is bigger. So, it is better to use a machine with a low-power laser tube to engrave, such as 40W, 50W or 60W. Q: Is it better to increase blow to improve laser processing performance? A: For some thick materials, it works. But, when carving some other materials, you need to blow less.
Q: How long will it take to learn to operate a laser machine? A: If you are able to use some basic graphic design software, it will only take a few hours to master the operation. You just need to do some simple tests on different processing materials to know how to set the correct speed and laser power. Q: Is a laser machine in operation harmful to our bodies? A: It is not harmful as long as the laser is not exposed directly to skin and eyes.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "bestlasershop" and is located in this country: CN.