20 in x 28 in working area. The Monport 60w's engraving speed (up to 500 mm/s) offers you more efficiency. HIGH RESOLUTION AND HIGH ACCURACY.
Resolution up to 4500 dpi. 2.0 Focal lens provides higher resolution and etching of extremely small fonts. Built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise. SMART AND UPGRADED RUIDA DIGITAL CONTROLLER. Controller like a brain, conducting the laser head, adjusting laser power and speed settings, file viewing, project framing and works well with laser software like RDWorks, Coreldraw_laser, Auto-CAD_laser and Lightburn.2 USB ports allow more options including flash drive connectivity and a USB-to-USB PC connection. In addition, one ethernet port is also available for connection. Equipped with a transparent acrylic viewing window, it allows you to observe the laser engraving and cutting state. Plus, the dark sepia color protects you from indirect laser beam exposure. The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance. The safety shutdown sensor helps stop the machine when opening the transparent window cover.
Once closed, press the "Enter" button to continue operation. Monport exterior: 47.2" x 38.2" x 36.2 (120cm x 97cm x 92cm). 20 x 28 in (500 x 700 mm). 7" Standard Z-depth and 9" Max Z-depth. Works on Windows 7,8,10 (64/32 bit), XP, 2000, and Vista.
MacOS (Version 10.11 and higher) ONLY with LightBurn software. Compatible with Coreldraw_laser, Auto-CAD_laser and lightburn. Supported with BMP, PLT, HPGL, GIF, JPG, JPEG, DXF, DST, AI, PDF, RD, SVG, TIFF, TGA and other formats. Custom CO2 glass laser tube capable of continuous operation at 10,640 nm.
18mm Focal lens diameter & 2.0 Focal lens. Recommended engraving speed: 100 - 500mm/s. Recommended cutting speed: 1 - 30mm/s (actual speed depends on material). Headlights under the lid give point illumination for precise. Can safely engrave or cut any laser-compatible material like.Linear System - Custom extruded aluminum linear rails. Motion - Equipped with stepper X, Y, Z axis. Cooling - easy-to-setup water pump and hoses. Air Assist - Internal air assist with no external compressor. Ventilation- expels smoke and fumes to keep safer. Recommended Operating Temperature: 60F-104F (16C-40C). Uses standard 110V AC power connection.
4-Pin Port connection for rotary axis devices. Certified to FDA & CE & ISO9001 Quality. Emergency stop to cut all power. Water flow sensor to prevent the laser from firing.Stop block sensor to protect and control the motion. Up to 2,000 operation hours depending on power setting. 1 x Laser Engraver Machine. 1 x Ethernet to Ethernet Cable.
1 x USB Type-A to Type-A Cable. 1 x Venting Exhaust Duct 4 ft. 1 x USB Drive with Software. But remember to keep the item clean, intact with all labels, or we won't accept your request.This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "lwhuru" and is located in this country: US. This item can be shipped to United States.