PROCESS: By non-contact processing, this laser engraver won't cause mechanical extrusion or mechanical stress on materials, won't damage materials' surface, or make them out of shape. Beam and spot diameter are generally less than 0.5mm, cutting processing to save materials, safety and health. HIGH-PRECISION: High efficiency power supply, adopt new high-voltage switch mode, PWM master technology, more stable performance. Blow to prevent burning during engraving, open lid with laser paused protection and water pump water cutoff protection, safer operation. LONG SERVICE LIFE: Perfect optical system, imported linear guide and belt drive, make cutting more smooth, stable and precise.
High-power stepper motor, driving force stronger. Embedded HTK linear guide design, use life can up to 10 years. Communication Interface: USB port; Laser Type: CO2 Gas.
Wavelength: 10.6um; Laser Power:50W. Engraving Area: 400x600mm; Adjustable Height: 30mm. Engraving Speed: 0-500MM/S; Cutting Speed: 0-200MM/S. Resolution Ratio: 1000dpi; Plugin: CorelLASER/LaserDRW.Carving Depth0-2mm (according to the material). System: WIN7/WIN8/XP 32-bit/64-bit (Does not support WIN10). Cutting Thickness: 0-5mm (Acrylic); 0-3mm(hard wood, MDF sheet); 0-5mm(soft wood like plywood, composite board). Engraving (cutting) accuracy: line width 0.05mm±0.01mm, minimum Chinese character 1.5mm. Laser Power: 110V(90-130V) 60HZ.
220V(200-240V)(Selected by customer country). LASER HEAD AND LASER TUBE. Upgraded industrial-grade laser head with stable beam, fast engraving speed and perfect dustproof and pollution-proof design, wear resistant, heat resistant. The leading brand laser tube has high quality, reliable performance and durability. CNC DISPLAY PANEL AND WORK PLATFORM.
CNC display panel, simple buttons, digital display and visual operation. Large working platform with engraved fixture, high precision compass plotter. Reinforced mirror with thick profile to ensure stable reflection of the mirror source. We will provide a safe and reliable packaging, the damages in the transport link will be compensated and replaced by our part. We just provide engraving machine plugin CorelLASER/LaserDRW, you can use these plugins for simple operations(to use CorelDRAW and other drawing software, you must install CorelLASER or LaserDRW driver plugins).We dont provide CorelDRAW, so make sure you have installed the right version, otherwise you will not be able to use the engraving machine. Application: seal engraving, advertisement, art gift, garment, leather, toy, building upholster, computerized embroidery, packing, printing, paper product, garments sampling, etc. Matched: Acrylic, Plywood, Density board, Solid wood, PVC, Leather, Glass, Double color plate, Plastic, Silica gel, Ox horn, Felt, Resin, etc, All non-metal materials. Not apply to metal: Can't engraving metal, Only engrave the coat of paint on the metals.
Machine use questions welcome to ask the online service. : There is no specific time limit for the lubrication of the mechanical parts (reasonable maintenance according to the use of the machine). If engraving and cutting materials what are corrosive or easy to produce dust, it is recommended to lubricate the parts after each use of the machine.
If engraving and cutting the wood materials, the parts can be lubricated every 2 weeks (apply lubricant with linen, avoid Direct contact by hands, normal car lubricants can be used). Lens: If engraving and cutting materials what are corrosive or easy to produce dust, Clean the lens after each use of the machine. If engraving and cutting the wood materials, the lens can be clean every 2 weeks. Please clean it with cotton swab and stick alcohol. When wiping the lens, pay attention to check if there are any scratches on the lens or if the reflective film falls off.
Laser tube: The laser tube cooling water should be enough, at least 15 liters of water, keep the water cold and cycle it often. Change water every 2 weeks in Summer (Water temperature should not exceed 30 degrees in summer, can put ice in the water to cool down); Change water every 1 month in Winter (be careful not to let the water freeze in winter); When the machine power is high, need to keep the water clean. Before the machine starts working, be sure to Check whether the laser tube through the water normally, otherwise the laser tube will be damaged.The item "TEN-HIGH Desktop Standard 50W 400600MM USB Port Laser Engraving Cutting Machine" is in sale since Monday, August 5, 2019. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "eroslin" and is located in shenzhen. This item can be shipped worldwide.