Secondhand 20x12 50W CO2 Laser Engraving Cutting Machine Engraver wRotary Axis

  
Convenient Size: 11.5" x 19.5" (295 x 495mm) engraving/cutting area 40" x 26" x 20 (102 x 65 x 50cm) overall dimensions Net Weight 165 lb. (75 kg) Tackle large-scale projects with ease An adjustable stabilizing base allows easy height adjustment. Compatibility: The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included) RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.

The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included) Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into. RD files for laser processing. 4-Pin Port connection for rotary axis devices Does NOT include LightBurn Software.

Power: The integrated power supply features increased response speed, performance, and cutting power - it's beaming with possibilities! A secondary LCD display panel monitors the electric current and auto-judges fault, reducing potential damage to the laser tube and power supply. Cut up to 6 mm ¼? Thick acrylic/plexiglass Uses standard 110V AC power connection. Laser Tube Lifetime: 50W CO2 laser tube with an estimated lifetime of up to 2,000 operation hours depending on power setting usage and water cooling performance PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows: Low Power 10-40% = 1,700-2,000 Hours Moderate Power 40-70% = 1,300-1,500 Hours High Power 70-100% = 800-1,000 Hours. Cutting-Edge Features: RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection.

Plus, the ethernet connection is compatible with PCs. DUAL WORKBEDS: This laser cutter offers a 20" x 12" workbed with both honeycomb and knife blade engraving platforms to handle a wide variety of objects and materials. LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. ROTARY AXIS INCLUDED: Easily engrave irregular and cylindrical surfaces like cups and bottles. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process.

Plus, it's equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.

TWO-WAY PASS-THROUGH: There's always extra room! Equipped with 18"W x 1.5"H front and rear pass-through doors to accommodate materials larger than the workbed size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup.

Only use with distilled water, ensuring it stays between 60-70°F (16-21°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube.

AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the "Enter" button to continue operation. Package Includes: 1 x Laser Engraver Machine 1 x Rotary Axis 1 x Water Pump 10 x Hex Wrenches 1 x Grounding Wire 1 x USB Type-A to Type-A Cable 1 x Ethernet to Ethernet Cable 1 x Power Cord 1 x Tube of Silicone Insulation 1 x 7mm Acrylic Focus Tool 1 x Roll of Double-Sided Tape 1 x Venting Exhaust Duct 4 ft. Length 1 x Hose Clamp 2 x Water Hoses 1 x Keys 1 x 4G USB Drive with Software 1 x Accessory Box 1 x Instruction Manual. Certifications: FDA Compliant CE Certification ISO9001 Quality Certification One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California. Compatible Materials: Laser Cutting: Acrylic Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium Cannot cut hardwoods like mahogany. CO2 lasers only mark bare metals when anodized or treated.

Some PVC-based acrylics can create toxic fumes when lasered. The two-way pass allows you to feed material into the workbed from the front or back and cut materials larger than your bed size by sliding them through the cabinet. The Beehive-Pattern Cutting Platform offers stability, noise reduction, and heat resistance for smaller items, while the Aluminum Knife Cutting Platform offers adjustable height and intense rigidity for larger items like acrylic material. Our package includes a rotary axis for engraving on 1â?? ³ diameter cylindrical objects including glass cups, automatically rotating the object as the laser operates.

One USB port reads flash drives while the other connects directly to your PC via dedicated cable. The Ethernet port allows you to work remotely online. An air compressor mounted on the laser head blows away all smoke, dust, and sparks to protect your laser lens and extend its service life. It comes pre-installed, so it's ready to go as soon as you open the box. 500 mm workbed gives you plenty of space to work on wood, rubber, plastic, paper, fabric, leather, ceramics, tile, fiberglass, marble, stone, and moreâ??

Even before you open the integrated pass-through doors that permit you to work on even larger pieces! The industrial-grade laser head delivers a stable laser beam over the long service life of the machine, while the red-dot locator helps to quickly indicate engraving points and marks the engraving path, allowing effortless setup and operation. The multi-window acrylic glass cover allows you to observe laser processes and correct misplacements, plus, the sepia tint protects your vision from the laser light. The laser will automatically cease engraving actions upon opening the cover door.

Simply close and press the start button to continue operations. (0-10 mm)depends on materials.

0-23.62 in/s (600 mm/s). Optimized Raster, Vector, and Combined. Flash Drive, USB Cord, Ethernet Cord. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "seriouswholesaler" and is located in this country: US. This item can be shipped to United States.

• Feature: ESCP
• Brand: OMTech
• MPN: MF-1220-50E
• Engraving Method: Laser
• Type: Engraving Machine
• Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
• Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Signs
• Power: 50 W
• Machine Operation: Computerized
• Name Tag Style: Badge
• Model: SH-G350
• Input Power: 110V/60Hz AC
• Processing Area: 12×20 in. Engraving Depth: 0.25 in.

  (6 mm)

• Workbed Adjustment: Manual
• Workbed Height Range: 4.7 in. (120 mm)
• Front/Back Pass Size: 25×1.46 in. Engraving Speed: 23.6 ips (600 mm/s)
• Max. Cutting Speed: 15.7 ips (400 mm/s)
• Included Software: RDWorks 8, CorelLaser
• Graphic Operating Modes: Optimized Raster, Vector, and Combined
• Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
• Net Weight: 165 lb. (75 kg)
• Machine Dimensions: 41×25.6×19.7 in.

  (104×65×50 cm)

• Rated Power: 50W
• Laser Wavelength: 10.6 μm
• Laser Tube Diameter: 2 in. (50 mm)
• Laser Tube Length: 34.6 in.

  Service Life at <40% / 40–70% / >70% Power: 1700–2000 / 1300–1500 / 800–1000 hr.

• Focal Lens Diameter: 18 mm
• Focal Length: 2 in.
  (50.8 mm)
• Mirror Diameters: 25 mm