Laser Master 2 Pro is newly upgraded, adding new functions such as flame detection , emergency stop , etc. With stronger system reliability, smooth engraving, faster engraving speed, higher accuracy, and more refined engraving products. The new upgrade brings users a better experience! Laser Master 2 Pro has a longer service life, because the mechanical structure has been optimized and designed to have a faster speed and can work stably for a long time. At the same time, Ortur Laser Master 2 Pro can provide users with more security because it has more security features.
Because it is equipped with the latest OLM-PRO-V10 motherboard , the engraving is smoother and more delicate, the engraving accuracy is higher, and the speed is faster. The circuit system with 24V voltage is upgraded, the current is lower, and the system is safer. Update Ortur Laser 1.5 firmware , which is the most advanced laser engraving machine firmware at present, with more powerful functions.Support Ortur offline control screen. Ortur Laser 1.5 firmware is based on OLF1.4 firmware upgrade, optimizes the motion algorithm, and increases the maximum motion speed from 4000mm/min to 10000mm/min. The focus of the LU2-4 laser module is smaller because of it. It is the second-generation FAC laser module, the focal point is only 0.080.15mm, and the focal area is about a quarter of the first-generation 0.230.23mm. So he can cut through 3mm plywood and 6mm pine board at a time. When the engraving machine is displaced or tilted, it will automatically stop the laser to prevent damage to the target from the laser; 2. When the engraving machine or computer crashes, the laser will stop working immediately to prevent continuous fire. The engraving machine is turned on, but there is no movement for a long time, it will be protected, and the laser will be turned off automatically. Flame Detector + Buzzer Alarm 5. Emergency stop switch for emergency.
Motherboard: OLM-MAXUP-V10 Motherboard, with 32Bits MCU Firmware: OLF-V1.5 Firmware Safety Precautions: 1. Exposure Duration Detection and Limitation; 3. Laser Beam Safety Guard; 4.Emergency Stop Button Add-ons: 1. Ortur Control Box (Offline Controller); 2. Adjustable Z-axis Lifting Device; 3. YRR 2.0 Rotary Roller; 5. Detachable Box Frame Materials: Aluminum + Powder Coated Steel Motors: NEMA 17 Stepper Motors Mechanical Precision: Y:12.5umX:12.5um Pixel Accuracy: Adjustable (Default: 300 pixels per inch, about 0.81um Pixel Accuracy) Engraving Area: 400mm400mm Available Laser Modules: LU2-4 (2nd Generation FAC , Luminous Power: 4,500-5,000mw) Wave Length: 445±5nm Focus: Fixed Focus Default Focal Length: 50mm (from the heat sink to the object) Control Mode: PWM Power Rate: S0-S1,000 Engraving Speed: 0-10,000MM/Min Baud Rate: 115200 - 921600 (Default: 115200) Computer OS: Win XP, Win 7, Win 8, Win 10 (LaserGRBL); Mac and Linux (LightBurn) Control Softwares: LaserGRBL (free), LightBurn (Paid Software) Input Format: JPG, JPEG, PNG, BMP, SVG, etc.
Available Materials of Engraving: Wood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc. Available Materials of Cutting: Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc. Input Voltage: 110V-220V (Compatible) Power Adapter Output: 24V/2A Operating Temp. When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire. Do NOT operate laser without eye protection (Laser goggles).
Please set up laser engraver in the fireproofing area, with good ventilation. Please keep minors (especially kids younger than 14 yours old) away from this laser engraver.Minors of any age should not use this laser without direct Adult supervision and proper eye protection. Please avoid strongly impact on the machine. Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut. Serious physical harm is possible if used improperly.
Please do not touch the heat sink, when the laser engraver just stop working, it may scald your hands. Use the laser engraver in a room that can be closed by a door and ensure that neither laser beams nor stray light can penetrate through the windows. While using the laser engraver, use door signs or a warning light on the door that indicates the laser engraver is in operation. The item "Ortur Laser Master 2 Pro USB CNC Laser Engraver Marking Machine Wood Cutter DIY" is in sale since Sunday, December 12, 2021. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".The seller is "dewallie_official" and is located in Hebron, Kentucky. This item can be shipped to United States.