When your work is done, just unlock the casters and wheel it anywhere you want for easy storage and quick transport. Check out our many Accessories and Parts to go along with your laser machine!
The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks. 1 x Laser Engraver Machine. 1 x USB Type-A to Type-A Cable. 1 x Ethernet to Ethernet Cable. 1 x Stainless Steel Clamp.Engraving Depth: 0.25 in. Workbed Height Range: 9 in. Front/Back Pass Size: 25×1.46 in. Engraving Speed: 23.6 ips (600 mm/s). Cutting Speed: 15.7 ips (400 mm/s). Included Software: RDWorks 8, CorelLaser. Graphic Operating Modes: Optimized Raster, Vector, and Combined.
Transfer Interface: Flash Drive, USB Cord, Ethernet Cord. Machine Dimensions: 40.2×25.6×24.8 in. Laser Wavelength: 10.6 µm.Laser Tube Diameter: 2 in. Laser Tube Length: 34.6 in. If you must modify your. Special circumstances will be stated clearly in the listing. Please check everything carefully after you receive the parcel, as any damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products.
We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.Return request need to be within 30 days of receipt. Bring your ideas to life with OMTech's laser engraver AF series! This powerful 80W CO2 laser engraver continues to uphold our high standards with its Ruida control panel, bundled RDWorks 8 software, long-lasting laser tube, wide 24x35 inch working area, and 4 pass-through doors that allow even larger pieces to be worked on. This laser cutting and engraving machine provides dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger, harder substrates like acrylic blocks. This engraver is able to automatically focus the laser at the push of a button and its 86 stepper motor raiser and lowers either workbed at the push of a button, making your work even more convenient and efficient. In addition to high quality, durability, and the usual long service life, this laser cutter is also very practical, with a built-in air assist blowing dust and debris away from the laser head and into the large-capacity hopper below for easy cleanup at the end of the day. Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design into wood, paper and cardboard, plastics and acrylic, leather, fabric, and other nonmetallic materials with pinpoint precision. With OMTech's careful engineering, quality materials & assembly, and good name, you can do no better for all your marking, engraving, and cutting projects at home or in your workshop. Laser Tube Lifetime: 80W CO2 laser tube with an estimated lifetime of up to 8,000 operation hours depending on power setting usage and water cooling performance PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows: Low Power 10-40% = 7,000-8,000 Hours Moderate Power 40-70% = 5,000-6,500 Hours High Power 70-100% = 3,000-4,000 Hours. Compatible Materials: Laser Cutting: Acrylic Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium Cannot cut hardwoods like mahogany CO2 lasers only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. Certifications: FDA Compliant CE Certification ISO9001 Quality Certification.
The RUIDA Motherboard and intuitive RD Control System is easy to use and offers advanced capabilities. Compatible with third party software like LightBurn and AutoCAD. (1497×48 mm) front & back and 38?? (970×20 mm) on either side-allows you to work pieces much larger than the bed size by sliding them through as you go. The laser head is equipped with an automatic focus adjustment that you can use directly from the control panel, eliminating tedious manual adjustment.This powerful laser engraver comes with an industrial-strength water chiller included, keeping both your laser tubes nice and cool no matter the project. The crystal-clear LCD displays on the surface of the machine monitor the electric current, easily adjusted by nearby knobs, visualizing the working current and power. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety.
Close the cover and press Start to resume your work. Indicator Lights & Emergency Stop. Three indicator lights keep you easily aware of your machine's operation while the emergency stop immediately cuts the laser and stops all moving parts in the event of accident. 1 x Venting Exhaust Duct 4 ft. 1 x CW-5202 Water Chiller.
MPN: AF2435-80 Model: SH-G690 Input Power: 110V/60Hz AC Processing Area: 24×36 in. Engraving Depth: 0.35 in. (9 mm) Workbed Adjustment: Electric Workbed Height Range: 5.9 in. (150 mm) Front/Back Pass Size: 40.75×1.97 in. (1035×50 mm) Side/Side Pass Size: 28.66×0.79 in.Engraving Speed: 23.6 ips (600 mm/s) Max. Cutting Speed: 15.7 ips (400 mm/s) Included Software: RDWorks 8, CorelLaser Graphic Operating Modes: Optimized Raster, Vector, and Combined Transfer Interface: Flash Drive, USB Cord, Ethernet Cord Net Weight: 441 lb. (200 kg) Machine Dimensions: 56.7×42×37.8 in. Laser Tube Specs Rated Power: 80W Laser Tube Model: EFR F2 Laser Wavelength: 10.6 µm Laser Tube Diameter: 3.2 in. (80 mm) Laser Tube Length: 49.2 in. Lens & Mirror Specs Focal Lens Diameter: 18 mm Focal Length: 2½ in. (63.5 mm) Mirror Diameters: 25 mm. Compressor Power: 0.9 hp (0.68kW). Water Capacity: 1.6 gal. Flow: 3.2 gpm 12L/min. Product Dimensions: 22x11.4x17 in. Inlet/Outlet Port Diameter: 2/5 in.
If the weight of your order exceeds 150 lbs. OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California.Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving. Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together. We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success. All emails will be responded to within 12-24 hours. One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "acautoparts04" and is located in this country: US. This item can be shipped to United States.
Engraving Depth: 0.35 in. (9 mm)
Cutting Speed: 15.7 ips (400 mm/s)