OMTech 60W 28x20 CO2 Laser Engraver Cutter with Autofocus CW3000 Water Chiller

  
OMTech 60W 28"x20" CO2 Laser Engraver Cutter with Autofocus CW3000 Water Chiller. OMTech 60W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (AF2028-60). Our Mid-Range CO2 Laser Engravers - known for efficient engraving speeds and considerable cutting capabilities. Ranging from 50W to 80W, these laser engraving machines engrave effectively and cut through 6 mm to 9 mm. 35 thick plywood and acrylic. Start your laser engraving journey with a Mid-Range laser engraver by OMTech! RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs. LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. MOTORIZED AUTOFOCUS WORKBED: The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it's equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups.

AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. TWO-WAY PASS-THROUGH: There's always extra room! Equipped with 29"W x 3.75"H front and rear pass-through doors to accommodate materials larger than the workbed size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup.

Only use with distilled water, ensuring it stays between 60-70°F (16-21°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the "Enter" button to continue operation.

LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood, Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated.

Some PVC-based acrylics can create toxic fumes when lasered. FDA, CE, ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. If you must modify your. Laser tube and power supply. Special circumstances will be stated clearly in the listing.

If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any.

Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "acautoparts04" and is located in this country: US. This item can be shipped to United States.

• Brand: OMTech
• MPN: AF2028-60
• Engraving Method: Laser
• Type: Engraving Machine
• Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
• Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Signs
• Name Tag Style: Badge
• Power: 60 W
• Machine Operation: Computerized
• Model: SH-G570
• Laser Power Supply: 110V/60Hz AC
• Engraving/Cutting Area: 20″ × 28″ (50×70 cm)
• Engraving/Cutting Thickness: 0–⅜″ (0–10 mm)depends on materials
• Workbench Adjustment: Electric
• Workbed Adjustable Height: 9.1 in.

  Engraving Speed: 23.6 in. Cutting Speed: 15.75 in. (40 cm/s)

• Graphic Operating Modes: Optimized Raster, Vector, and Combined
• Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
• Net Weight: 331 lb.

  (150 kg)

• Machine Size: 47×34×36.6 in. (120×87×93 cm)
• Rated Power: 60W
• Laser Tube Model: OMTech 60W
• Laser Wavelength: 10.60 μm
• Laser Type: Class 1
• Laser Tube Diameter: 2.16 in. (55 mm)
• Laser Tube Length: 39.4 in. (1000 mm)
• Laser Tube Warranty Time: 6 Month
• Exp.

  Service Life at <40% / 40–70% / >70% Power: 1700–2000/1300–1500/800–1000 hr.

• Focal lens Dia: 18 mm
• Focal lens FL: 2.5 in.
• Mo mirror Dia: 25mm
• UPC: 729270385487