The transparent machine cover help you to monitor the engraving progess at any time, when an emergency occurs, press the emergency button or open the machine cover both can automatically cut off the power supply. 60W CO2 laser engraver adopts upgrade 6442 RUIDA system, RDworks & CorelLaser software are included (also compatible with third party software Lightburn & AutoCAD, NOT INCLUDE), features 16 × 24 inches large size workbeds, high performance 60W laser tube, 2 pass-through doors, honeycomb & aluminum blade dual platforms. This CO2 laser engraver has both honeycomb and blade engraving platforms, so that the machine can better engrave harder and softer objects.The honeycomb platform suits soft material and the blade platform suits hard material. A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. There's always extra room! Equipped with front and rear pass-through doors to accommodate materials larger than the workbed size. A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it's equipped with a sepia tint to protect your eyes from indirect laser beam exposure. A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60-70°F (16-21°C). Laser engraver with LCD digital display makes you easily monitor the laser tube temperature and adjust the machine's power suits the thickness of the engrave item. There also include a Emergency Shutdown Button can immediately cut-down the power when urgency happen. 2 pass-through doors make the machine can hold the engraving material lager than the machine itself. Quality power source can provide the laser tube with continuous power, this it will provide the laser engraver with longer service life.
Honeycomb and Blade Operate Platforms. This CO2 laser engraver includes 2 workbeds include the honeycomb platform and blade platform, they are suitable for engraving materials of different hardness, the honeycomb platform suits both hard ans soft material and the blade platform suits hard material. The included compatible 60w laser tube can cut deeper and engrave thicker material, thus it will help you complete lots of designs in the future. The display keeps you monitor the machine's working situation, the emergency stop button can immediately cut the laser working, also you can stop the laser working by opening its cover when occurs happen.The cover of this machine is transparent. You can monitor the engraving progress of the project at any time. Once an emergency occurs, the laser working can be cut off immediately by the emergency button or by opening the cover.
In addition, the transparent part of the cover has an eye protection coating. Protect your eyesight to a great extent. The upgraded ventilation system includes a new exhaust fan, it enables the machine to have better ventilation, can blow away the dust generated during its work, and avoid affecting the engraving process of the machine. Secondly, it can reduce the working temperature of the machine and improve the stability of engraving. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber.
Marking/Engraving:Acrylic, Wood, Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated.
Some PVC-based acrylics can create toxic fumes when lasered. What software is theis engravercompatible with? What size is the engraving area?
A:16 × 24 in/400 × 600mm. Does the engraver have any internal storage? A:No, the machine has no internal storage and must be connected to computer. What is the maximal engraving depth of this engraver?A:0-10 mm, varying according to materials and power. What materials can this engraver work with.
A:Organics /non-metal, wood, stone, leather, crystal, paper, and film, etc. How much is the laser power. Please note that if you are going to be working with machine for 8 hours or more per day that it is important to let the unit rest for a half hour every 4 hours.
What picture format is it compatible with. A:All formats that can be recognized by CorelDRAW or AutoCAD, including jpg. Does the product have wheels? A: Yes, our products have wheels at the bottom. Tape for Laser Mirror Adjustment.
7 mm Acrylic Focus Tool. 4G USB Flash Drive (software). We always aim to put our customers first. We excel at providing fast updated products to our customers and aim to provide the best service via our dedicated customer service, product and dispatch teams.
Our team works tirelessly to ensure our consumers come first and this can be seen via our excellent track record. If you do encounter problems we are always on hand and happy to help just drop us a message.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "worldwide_aa" and is located in this country: US. This item can be shipped to United States.
Letter Size: 1*1 mm