Usb Laser Engraving

39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller

39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller
39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller

39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller    39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller

39"X24" USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller. For USA buyers Particular attention!! Please contact me before purchasing , we need to confirm your working materials. Otherwise I will cancel your order!! And need the Lift gate service.

New launch HL-1060 DSP 100W laser. Off-line with high-speed High configuration. The use of high-tech control system, Imported lens and reflector system. Use USB 2.0 off-line. Using professional high quality laser power supply and. The RDC6445 advantages of High-speed offline board configuration. It supports RDworks and CoreldRAW and CAD software to engrave and cut. The Engraving and cutting color separation work at the same time. The different colors can be set for different engraving and cutting speeds.

File formats supported by RDworks software. The Independent DSP system, can work without a computer. Insert USB flash disk, automatic. 1 x DSP 1060 100W C02 Laser engraving machine. 1 x Laser engraving software (down load link).

1 x User Manual (down load link). 1 x Air exhaust fan. 1 x Communication cable and USB cable. 1 x Soldering Iron (gift). Can the machine engraving and cutting?

Yes, even on the same Job, you can do setting with different colour in the software. Is the machine must work with computer? Must connect with computer with USB cable when you change the settings of machine.

For the design files, you can transfer the file with USB memory stick to the machine, Or can download it to the machine directly with USB cable from computer. Can the machine be split so it can fit into my doors?

Sorry, it can't do. How long the laser tube is working well? Unfortunately we cannot confirm about this, it is about 0-7000 hours. Do you avaliable spare parts? We can provide all of spare parts of any model we listing. I have heard the mirrors need cleaning?

Yes they do but not after every job, once a week is normally enough. Can I put larger materials in the machine? No, the machine have not doors which opened to accommodate larger materials.

How about the after sell service? Free tech support for the whole life of the machine, and 24 hours telephone support. Original packaging is present for most New items but certain items may be re-boxed.

The item may show some limited signs of wear with small scratches or cosmetic blemishes. Warrants your product for a period of.

If you discover a defect. Replacement parts, replaced by user. Should the product(s) fail, your sole recourse shall be repair or replacement, as described in the preceding paragraphs.

We will not be held liable to you or any other party for any damages that result from the failure of this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, lost data, damage to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. By installing or using the product, the user accepts all terms described herein. Most of our items leave the warehouse within.

San Leandro, CA, United States, Warsaw Poland, Ontario Canada. Please do not forget to give us. We believe that everything could be solved by communication. Feedback is simply what we pursue.

The item "39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller" is in sale since Thursday, April 29, 2021. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "ussigns" and is located in Ontario US. This item can be shipped to United States.

  • Brand: HLJ laser cut
  • Model: HL-1060S
  • MPN: Does Not Apply
  • Country/Region of Manufacture: china
  • Laser tube power: 80W
  • Voltage: AC110/220V
  • Lifting platform is electric control: 0-20cm
  • Max speed: 500mm/s
  • PC Interface: USB2.0
  • Laser tube type: CO2 Glass sealed laser tube
  • Laser brand: EFR F2 Laser Tube
  • Resolution: 1000 DPI
  • Location precision: 0.01mm
  • System environment: WINDOWS XP/WIN7/WIN8/WIN10
  • Sloping engraving: YES
  • Color separation: YES
  • Rails: X Linear Guide
  • Auto-focus: YES
  • Control board: Ruida RDC6445
  • Engraving Speed: 300mm/s
  • Cooling mode: CW3000 Chiller
  • Control software: RDworks/Lightburn
  • Engraving Method: Laser engraving
  • Cutting speed: 5-20 mm (different material differ)
  • Rated Power: 80W
  • Peak Power: 90W
  • Type: CO2 Laser
  • Material: Metal

39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller    39X24 USB EFR 80W-90W CO2 Laser Engraving Cutting Machine With CW-3000 Chiller