(NOT INCLUDED in our product). The item can only be delivered where the truck can park. Please provide us with the valid commercial address.60W Laser Tube Pre-installed, Working Size: 20x28. Used to engrave on wood, bamboo, Plexiglas, crystal, leather, rubber, marble, ceramics etc.
Higher resolution standard optics, no additional expensive lens packages needed. Visible red dot pointer for guidance.
Air compressor directs a constant stream of air to remove heat and combustible gases from the work area. Our product is fully compatible with compatible with Core Laser, RDworksV8 & CAD Laser, but none of these software is included in the package. Our products have always been very popular on the market. The best way to describe how this lasers work is to compare it to your printer. This devise uses the images you would typically print on paper, but instead, a CO2 laser beam is fired on the surface which engraves the design on the material.
Laser: CO2 laser source, 60 watts. Engraving Materials: Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble, corian, leather, fabric, cloth, coated metals, anodized aluminum, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more.Cutting Materials: Wood, acrylic, plastic, corian, delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork and more. We strive to provide the best image quality, speed, reliability, and ease of use. By using only the highest-quality components, our lasers are known for their reliability and performance. Working size: 20"x28" (500 x 700mm) with double side open door. Up and Down work plate: 8.
Carving speed: 1000mm/s(different materials differ). Height of the Base: 220mm (8.7). Focus Lens: 18mm (0.7) diam.Focal Distance: 40mm (1.6). Compatible Connector: 4 pin connector Rotation axis is NOT INCLUDED. 1× Pre-installed 60W CO2 Laser Engraver 1. What software is this engraver compatible with? What systems is this engraver compatible with? Its perfectly compatible with Windows 8, 7 (64/32 bit), XP, 2000, but NOT compatible with iOS system. Is there any limitation for the maximal depth of engraving materials? 28" x 20" /700 x 500 mm. Whats the maximal engraving depth of this engraver?
It shall be within 0-8mm, but still depends on the speed and materials. Is there any limitation on the material thickness? The maximum engraving material thickness shall be 230mm.What engraving materials can this engraver work with? Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble. Corian, leather, fabric, cloth, coated metals, anodized aluminum, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more.
What cutting materials can this engraver work with? Wood, acrylic, plastic, corian, delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork and more. Is there any rotary attachment in it? No but you can install one. How long is the laser tube?Is there a red dot pointer in the engraver? How much is the engravers. Is the laser safe to operate? Yes, the laser is completely safe to operate. It is secured with interlock devices so it will not run with the devise door open. Can the laser engrave metal? Our CO2 laser systems are mainly designed to engrave and cut non-metallic materials, they can also be used to mark on metal with the aid of metal-marking compound. Can the laser cut through metal? But it will still mark on coated metal, even though our system is not ideally suited for metal applications. Didn't find the answer to your question?
At the bottom of this page.. We're happy to help you with anything! The item "New 60W 110V CO2 Laser Engraving Machine Engraver Cutter with USB Interface" is in sale since Wednesday, January 18, 2017.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "acautoparts04" and is located in Anaheim, California.This item can be shipped to United States.