Usb Laser Engraving

Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller

Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller
Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller

Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller    Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller

Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller. Please contact me before purchasing , we need to confirm your working materials. Otherwise I will cancel your order!! And also need the Lift gate service. 1 x DSP 1060 80W C02 Laser engraving machine.

1 x Laser engraving software (down load link). 1 x User Manual (down load link). 1 x Air exhaust fan.

1 x Communication cable and USB cable. 1 x Honeycomb work platform. NOT Ready for Nowise(beginner). What's the Ruida RDC6445 System. New launch HL-1060 DSP 80W laser.

The use of high-tech control system, Imported lens and. Use USB 2.0 off-line. The RDC6445 advantages of High-speed offline board configuration.

It supports RDworks and CoreldRAW and CAD software to engrave and cut. The Engraving and cutting color separation work at the same time. The different colors can be set for different engraving and cutting speeds. File formats supported by RDworks software. The Independent DSP system, can work without a computer.

Can engraving and cutting directly. This machine is suitable to. Textile cutting, industrial prototyping, industrial.

Gasket cutting, puzzles, cabinetry, awards &. Games & toys, finger joints. Music boxes, light switch plates, jewelry boxes, parts. Can the machine engraving and cutting? Yes, even on the same Job, you can do setting with different colour in the software.

Is the machine must work with computer? Must connect with computer with USB cable when you change the settings of machine. For the design files, you can transfer the file with USB memory stick to the machine, Or can download it to the machine directly with USB cable from computer.

Sorry, it can't do. How long the laser tube is working well? Unfortunately we cannot confirm about this, it is about 0-7000 hours.

Do you avaliable spare parts? We can provide all of spare parts of any model we listing. I have heard the mirrors need cleaning? Yes they do but not after every job, once a week is normally enough.

Can I put larger materials in the machine? No, the machine have not doors which opened to accommodate larger materials.

How about the after sell service? Free tech support for the whole life of the machine, and 24 hours telephone support. Original packaging is present for most New items but certain items may be re-boxed. The item may show some limited signs of wear with small scratches or cosmetic blemishes.

Warrants your product for a period of. If you discover a defect. Replacement parts, replaced by user. Should the product(s) fail, your sole recourse shall be repair or replacement, as described in the preceding paragraphs. We will not be held liable to you or any other party for any damages that result from the failure of this product.

Damages excluded include, but are not limited to, the following: lost profits, lost savings, lost data, damage to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. By installing or using the product, the user accepts all terms described herein. Most of our items leave the warehouse within. San Leandro, CA, United States, Warsaw Poland, Ontario Canada. Please do not forget to give us.

We believe that everything could be solved by communication. Feedback is simply what we pursue. The item "Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller" is in sale since Tuesday, March 2, 2021. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "ussigns" and is located in Ontario,New Jersey. This item can be shipped to United States, Canada, France.
  • Brand: HLJ laser cut
  • MPN: Does Not Apply
  • Model: HL-1060S
  • Country/Region of Manufacture: China
  • Laser tube brand: EFR F2 laser tube
  • Sloping engraving: YES
  • Auto-focus: YES
  • Color separation: YES
  • System environment: Windows XP / Win 7 / Win 8/Win 10
  • Rails: X Linear Guide
  • Control board: Ruida RDC6445
  • Working area:: 600*1000mm
  • Lifting platform: 0-200 mm Honeycomb Worktable
  • Control software: RDworks/Lightburn
  • Laser power: 80W
  • Engraving speed: 0-300mm/s
  • Cutting speed: 5-20 mm (different material differ)
  • Power supply: AC 110/220V
  • Machine Dimensions: 144*94*64cm
  • Machine Weight: 135KG
  • Chiller: NO
  • Engraving Method: Laser engraving

Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller    Auto-Focus EFR 80W-95W USB Co2 3924Laser Cutting Engraving Machine no chiller