Usb Laser Engraving

60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC

60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC

60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC    60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC
Engraver Cutter Laser Engraving Machine 60W CO2 Reliable Motherboard Re-position. It does not include lift gate & residential. Our products have always been very popular on the market. The best way to describe how this lasers work is to compare it to your printer. This devise uses the images you would typically print on paper, but instead, a CO2 laser beam is fired on the surface which engraves the design on the material.

Laser: CO2 laser source, 60 watts. Engraving Materials: Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble, corian, leather, fabric, cloth, coated metals, anodized aluminum, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more. Cutting Materials: Wood, acrylic, plastic, corian, delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork and more.

We strive to provide the best image quality, speed, reliability, and ease of use. By using only the highest-quality components, our lasers are known for their reliability and performance. 60W Laser Tube Pre-installed, Working Size: 20x28. Used to engrave on wood, bamboo, Plexiglas, crystal, leather, rubber, marble, ceramics etc. Higher resolution standard optics, no additional expensive lens packages needed.

Visible red dot pointer for guidance. Air compressor directs a constant stream of air to remove heat and combustible gases from the work area. 28" x 20"(700 x 500 mm). WINDOWS 2000/WINDOWS XP/ WIN7/ WIN8/VISTA/10 (32bit and 64 bit).

DO NOT support iOS system. Digitally controlled CO2 laser tubes are fully.

Attach an air compressor to our included Air Assist toremove excess heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. Do not include in the package. Since the laser beam is invisible, a Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire. Ground and polished stainless steel long-lasting bearing system.

Vector color mapping links speed, power and focus to any RGB. Size (W x D x H). 45" x 33.8" x 38(1150 x 860 x 970 mm). An Air Compressor can work with the included Air Assist features of the laser systems.

Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area. Metals with plating can NOT be engraved or cut.

CO2 lasers will mark bare metals when coated with a metal marking solution. Our CO2 laser systems are mainly designed to engrave and cut non-metallic materials, they can also be used to mark on metal with the aid of metal-marking compound. 1x roll of double faced tape.

How tall is this product? Whats the height of the base? What software is this engraver compatible with? What systems is this engraver compatible with?

Its perfectly compatible with Windows 8, 7 10 (64/32 bit), XP, 2000, but NOT compatible with iOS system. Is there any limitation for the maximal depth of engraving materials? 28" x 20" /700 x 500 mm. Whats the maximal engraving depth of this engraver?

It shall be within 0-8mm, but still depends on the speed and materials. How much is the laser power? CO2 glass 60W rated an estimated 2000 hours.

8 hours work-time a day is recommended and youd better let the engraver rest for half an hour each 4 hours. Is there any limitation on the material thickness? The maximum engraving material thickness shall be 230mm. What engraving materials can this engraver work with?

Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble. Leather, fabric, cloth, coated metals, anodized aluminum, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more.

What cutting materials can this engraver work with? Wood, acrylic, plastic, corian, delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork and more. Is there any rotary attachment in it?

No but you can install one. How long is the laser tube? Is there a red dot pointer in the engraver? How much is the engravers.

Is the laser safe to operate? Yes, the laser is completely safe to operate. It is secured with interlock devices. So it will not run with the devise door open. Can the laser engrave metal?

Can the laser cut through metal? But it will still mark on coated metal, even though our system is not ideally suited for metal applications. Didn't find the answer to your question? We're happy to help you with anything!

Your kind consideration would be highly appreciated. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products.

We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. The item "60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC" is in sale since Wednesday, December 5, 2018. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "seriouswholesaler" and is located in Anaheim, California. This item can be shipped to United States.
  • Brand: Preenex
  • MPN: Does not apply
  • Working size: 20" x 28" (500 mm x 700 mm)
  • Up and Down work plate: 8"200mm
  • Software environment: Windows 2000/XP
  • Carving speed: 1000mm/s(different materials differ)
  • Warranty: 2 years warranty
  • Machine weight: 276lbs
  • Color: black and yellow

60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC    60W Laser Engraver Cutter Engraving Cutting machine 20x28 USB, U-flash and PC