Usb Laser Engraving

30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY

30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY
30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY
30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY
30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY
30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY
30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY
30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY
30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY
30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY
30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY
30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY

30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY    30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY

30 W Portable Fiber Laser Marking Machine for Metal /Non-metal. Brand New, High Quality and Extra Long Life. Wide application: high tech for both metal and non metal marking engraving.

Great performance: Identical marking quality with high speed. Long lifetime: Adopt China best quality advanced fiber generator, we guarantee we use genuine laser source, the life time could up to 100,000 hours. Low consumption: It is environment-protecting and energy-saving, power consumption is reduced.

By 3-10 times co mpared with YAG laser. Using cost is really cheap. Maintenance-free: The machine is maintenance-free, there is almost no any parts need to change after long term use. Easy operation: The machine is very easy to use, and even the fresh man can use it well. Text, pattern, date, bar code, etc. BMP, JPG, GIF, TGA, Ai, DXF, PLT, PNG, TIF, ai, DXF, DST, etc. 40 x 20 x 40 cm. Flash driver / u disk. Ruler / red dot position. Key switch / laser switch.

Free change new machine within 1 year. Offer oversea service free for training, installing, operating if necessary.

Offer training at our factory for free (you could visit us and learn). The item "30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY" is in sale since Wednesday, October 17, 2018. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "ruiyangcnc" and is located in CN. This item can be shipped worldwide.

  • Table Model: Honeycomb
  • Featured Refinements: Laser Engraver
  • Warranty period:: 5 years
  • Communication Interface: USB
  • Model: RY-F30
  • Country/Region of Manufacture: China
  • Custom Bundle: Yes
  • Cooling Mode:: Air cooling
  • Engraving Speed:: 7000mm/s
  • Laser Power:: 30W
  • Life-span of Fiber Laser Module:: 100 000hours
  • Minimum Line Width:: 0.012mm
  • Output Power of Laser:: 10%~100% continuously to be adjusted
  • Power Input:: 220V / 50HZ / single phase or 110V / 60HZ / sing
  • laser source brand: Raycus
  • Software:: EZCAD
  • System Operation Environment:: Windows XP / W7--32/64bits / W8--32/64bits
  • MPN: Does Not Apply
  • Brand: Reaying


30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY    30W Raycus Fiber Laser Marking Machine Metal Non-Metal Engraving CNC Steel DIY