Insert the USB disk Step 2: Install the driver. Exe" Step 3: Must Copy the "English zip to Computer desktop and then unzip it.Step 4: Connect the engraver to computer Step 5: Open the scarve-en. Exe" which is unzip from the "English zip Our power is sufficient.
If the power is found to be insufficient during use, the following three conditions can be detected. Check if the power supply output voltage is 12V 2. Check if the machine is connected properly 3. Check if the focus is adjusted Application A laser carving machine for home use, mainly used in wood, bamboo, PCB, leather, paper, plastic and so on. Package Included 1 x Laser engraver 1 x USB disk 1 x Screw driver 5 x Screws 5 x Screw caps 1 x Power cord 1 x USB cable 2 x Wooden board 1 x Chinese / English manual (distribute the adapter according to your country) Note.
You must focus before engraving, rotate the laser head by hand, and adjust the spot to the minimum and minimum spot. The product is a laser carving machine for home use, a tool machine, can not be compared with laser carving machine for industrial use. Do not use the laser head to point at human or livestock, do not use laser to point at people's eyes. Skin exposure to laser is strictly prohibited.
The caving machine should not be stopped while workingit will cause a damage. This product not suitable for kids under age of 14. Do not fall or make any collision to the product.
Metal, glass, crystal and transparent or translucent stuff are can not be engraved. The color of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored due to manual measurement.
Your kindly understanding would be appreciated. You might need to temporarily shut down the antivirus software before downloading the software. Otherwise some files in the software would be mistaken for virus and deleted by antivirus software.
Please according to the user manual to operate the machine. After 20 minutes of working, it need to take a break, can not work continuously for a long time. The item "3000mW USB Mini Laser Engraver DIY Mark Logo Printer Cutter Carver Engraving" is in sale since Saturday, February 29, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".
The seller is "biwecity" and is located in Shenzhen. This item can be shipped worldwide.