This machine can mark on stainless steel, iron and colorized anodized aluminum, can not engrave/mark on gold or silver, brass, etc. Can it engrave a depth on metal? There is no visible depth for the mark, can only leave a permanent marking. Please see demonstration videos above. Can easily cut about 3-4mm normal hardness to soft wood.
Hard types of woods should be tested by yourself. Can it mark on glass?
Can not mark on glass or similar surface. Can it mark on slightly curved objects? This machine can mark only on a completely flat surface since the focal length is fixed. What if I need a bigger working area? We have another 15W laser with 65x50cm.Frames, but keep in mind that these models have different capabilities and are DIY kits. For more information check the product pages. Can you answer another question about this machine? Mobile gantry, Body Aluminum + Acrylic.
Stepper motor, stepper precision: 0.00625mm. 14 x 20cm / 5.51" x 7.87". 0.02 to 0.2 sec / pixel.
Pulse 15W, average 8W, focal 18mm, adjustable by software. Stainless steel, iron, anodized aluminum, ceramics, stone. Engraving materials: Wood, bamboo, leather, plastics, etc. Software 255 adjustable laser power, low-light positioning, positioning freedom, gray, shortest path algorithm. Nanosecond timing of serial data transmission substantially without delay, power adjustable, high power pulsed laser, lifts fast focusing, targeting low light gray print!
Power supply Input: AC 100V-240V, 50/60Hz. Power supply Output: DC 12V 4A. Machine developed for use with AC master software, support Chinese, English, Russian, 4 languages.
Package size: 38 36 22cm. Super-reduced instruction, 1 byte of instruction accounted for more than 40%. Faster than Arduino + grbl, and instantly able to complete the task of interpretation of active instruction; shortest path algorithm can shorten the time. Plug & Play: You will receive the engraver in almost completely assembled condition.
It takes less than 5 minutes to start engraving. All you need to do is put the laser module in its place, connect it to the board, connect the USB cable to the board and to your computer. To be sure your address is not a remote area you can check the DHL remote area list website. The item "15W USB Desktop CNC Laser Engraver Cutter DIY Metal Marking Wood Cutting Machine" is in sale since Saturday, October 22, 2016. This item is in the category "Business, Office & Industrial\Printing & Graphic Arts\Other Printing & Graphic Arts".The seller is "jzelectric" and is located in Hong Kong. This item can be shipped worldwide.