Just a few screws away from connecting to your laptop! What kind of metals can this machine mark? This machine can mark on stainless steel, iron and colorized anodized aluminum, can not engrave/mark on gold or silver, brass, etc.
Can it engrave a depth on metal? There is no visible depth for the mark, can only leave a permanent marking. Please see demonstration videos above. Can easily cut about 3-4mm normal hardness to soft wood. Hard types of woods should be tested by yourself.
Can it mark on glass? Can not mark on glass or similar surface. Can it mark on slightly curved objects? This machine can mark only on a completely flat surface since the focal length is fixed.
What if I need a bigger working area? We have another 15W laser with 65x50cm. Frames, but keep in mind that these models have different capabilities and are DIY kits. For more information check the product pages.Can you answer another question about this machine? Body material: Aluminum + Acrylic. 14 x 20cm / 5.51" x 7.87". 0.02 to 0.2 sec / pixel. Focal length: 18mm, adjustable by software. Stainless steel, iron, anodized aluminum, ceramics, stone, wood, bamboo, leather, plastics, etc. Software 255 adjustable laser power, low-light positioning, positioning freedom, gray, shortest path algorithm. Nanosecond timing of serial data transmission substantially without delay, power adjustable, high power pulsed laser, lifts fast focusing, targeting low light gray print!
External adapter, DC 12V 4A, input AC 100V-240V, 47Hz-66Hz. Machine developed for use with AC master software, support Chinese, English, Russian.
Package size: 37 34 21cm. Super-reduced instruction, 1 byte of instruction accounted for more than 40%. Faster than Arduino + grbl, and instantly able to complete the task of interpretation active instruction; shortest path algorithm can shorten the time. You will receive the engraver in almost completely assembled condition. It takes less than 5 minutes and a screwdriver to assemble it.
First, put the laser module on the top part of the frame, it has a special mount that fits the laser. Just unscrew the bolts, put the laser in it's designated place and put the bolts back. To assemble the frame you need to unscrew 4 bolts, put the top part of the frame in place, and put the bolts back. After you finished assembly of the frame and laser module, you will need to connect the boards, USB cable, and power supply.
To be sure your address is not a remote area you can check the DHL remote area list website. The item "15W AS-5 USB Laser Incisore CNC Engraver Macchina Incisione per Metallo legno" is in sale since Tuesday, December 20, 2016. This item is in the category "Commercio, ufficio e industria\Fornitura industriale\Macchinari e attrezzature". The seller is "jzelectric" and is located in Shenzhen.This item can be shipped worldwide.