Usb Laser Engraving

10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood

10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood
10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood

10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood   10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood

10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal, Stone, Wood. This is the most powerful DIY Laser engraver available.

It comes with 10W / 15W. It can engrave metal and stone, cut wood, foam and other materials easily. Plug and play, Easy to use. Connect the USB cable to the board, install the software and start engraving. Just a few screws away from connecting to your laptop!

What kind of metals can this machine mark? This machine can mark on stainless steel, iron and colorized anodized aluminum, can not engrave/mark on gold or silver, brass, etc. Can it engrave a depth on metal? There is no visible depth for the mark, can only leave a permanent marking. Please see demonstration videos above and below. Can easily cut about 3-4mm normal hardness to soft wood. Hard types of woods should be tested by yourself.

Can it mark on glass? Can not mark on glass or similar surface.

Can it mark on slightly curved objects? This machine can mark only on the completely flat surface since the focal length is fixed. What if I need a bigger working area? We have another 15W laser with 65x50cm. Frames, but keep in mind that these models have different capabilities and are DIY kits. For more information check the product pages.

Can you answer another question about this machine? Body material: Aluminum + Acrylic.

14 x 20cm / 5.51" x 7.87". 0.02 to 0.2 sec / pixel.

Pulse 10w (100ns Duty 50%). Stainless steel, iron, anodized aluminum, ceramics, stone, wood, bamboo, leather, plastics, etc. Software 255 adjustable laser power, low-light positioning, positioning freedom, gray, shortest path algorithm. Nanosecond timing of serial data transmission substantially without delay, power adjustable, high power pulsed laser, lifts fast focusing, targeting low light gray print!

Power supply: External AC power adapter. Power supply Input: AC 100V-240V, 50/60Hz.

Power supply Output: DC 12V 4A. Machine developed for use with AC master software, support Chinese, English, Russian, 4 languages. Package size: 38 36 22cm. Super-reduced instruction, 1 byte of instruction accounted for more than 40%. Faster than Arduino + grbl, and instantly able to complete the task of interpretation of active instruction; shortest path algorithm can shorten the time.

To be sure your address is not a remote area you can check the. DHL remote area list website. The item "10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood" is in sale since Sunday, April 17, 2016. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "jzelectric" and is located in Hong Kong. This item can be shipped worldwide.
  • Interface: USB
  • Laser power: pulse 10w (100ns Duty 50%) Average 6-6.5W
  • Carving materials: Stainless steel, Iron, Anodized Aluminum, Ceramics
  • Carving material: Stone, Wood, Bamboo, Leather, Plastic
  • Software: AC master software
  • Bundle Listing: Yes
  • Model: AS-5 10W
  • Country/Region of Manufacture: China
  • Construction: Mobile gantry, Body Aluminum + Acrylic
  • Engraving area: 14 x 20cm / 5.51" x 7.87"
  • Engraving speed: 0.02 to 0.2 sec / pixel
  • Support operating system: Windows 7/8/10
  • Power supply: External AC power adapter
  • Power supply Input: AC 100V-240V, 50/60Hz
  • Power supply Output: DC 12V 4A
  • Dimensions: 32 * 30 * 21cm
  • Package size: 38 * 36 * 22cm
  • MPN: AS-5
  • Brand: DiYCNC

10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood   10W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood