Engraving Materials: Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble, corian, leather, fabric, cloth, coated metals, aluminum oxide, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more. Cutting Materials: Wood, acrylic, plastic, corian, delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork and more. Vector color mapping easily maps different speed and power settings to create different colors in your file; air compressor blows a constant stream of air on the cutting area.Its DSP control system works with most graphics design programs, such as CorelDraw, AutoCAD, etc. Allowing you to create same shape patterns with different colors. 28" x 20"(700 x 500 mm). Digitally controlled CO2 laser tubes are fully modular, permanently aligned and field replaceable. Attach an air compressor to our included Air Assist toremove excess heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
Do not included in the package. Since the laser beam is invisible, a Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire.Ground and polished stainless steel long-lasting bearing system. Vector color mapping links speed, power and focus to any RGB color. Size (W x D x H). 45" x 33.8" x 38(1150 x 860 x 970 mm). Auto-switching power supply accommodates 110volts, 60 Hz, AC.
An Air Compressor can work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area. Rotation axis is NOT INCLUDED.
1x Bag with allen wrenches. 1x Roll of double faced tape. What software is this engraver compatible with? What systems is this engraver compatible with? Its perfectly compatible with Windows 8, 7 10 (64/32 bit), XP, 2000, but NOT compatible with iOS system.
Is there any limitation for the maximal depth of engraving materials? 28" x 20" /700 x 500 mm. Whats the maximal engraving depth of this engraver?It shall be within 0-8mm, but still depends on the speed and materials. How much is the laser power? CO2 glass 60W rated an estimated 2,500 3,000 hours. 8 hours work-time a day is recommended and youd better let the engraver rest for half an hour each 4 hours. Is there any limitation on the material thickness?
The maximum engraving material thickness shall be 230mm. What engraving materials can this engraver work with?
Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble. Leather, fabric, cloth, coated metals, anodized aluminum, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more. What cutting materials can this engraver work with? Wood, acrylic, plastic, corian, delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork and more. Is there any rotary attachment in it?
No but you can install one. How long is the laser tube?Is there a red dot pointer in the engraver? How much is the engravers. Is there a water chiller in it?
Is the laser safe to operate? Yes, the laser is completely safe to operate.
It is secured with interlock devices. So it will not run with the devise door open.
Can the laser engrave metal? Our CO2 laser systems are mainly designed to engrave and cut non-metallic materials, they can also be used to mark on metal with the aid of metal-marking compound. Can the laser cut through metal?
But it will still mark on coated metal, even though our system is not ideally suited for metal applications. Didn't find the answer to your question?At the bottom of this page.. We're happy to help you with anything! Your kind consideration would be highly appreciated. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described.
Parts must be resaleable and in the original packaging. We cannot take back used products.We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. The item "100W CO2 USB Port Laser Engraving Cutting Machine 700x500mm Engraver Cutter" is in sale since Monday, May 21, 2018. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".
The seller is "freeshipping2you" and is located in Anaheim, California. This item can be shipped to United States.